Browse our Products
Aspose.3D for .NET 22.5 Notes de Libération
Cette page contient les notes de publication pour Aspose.3D for .NET 22.5.
Améliorations et changements
Clé | Résumé | Catégorie |
---|---|---|
THREEDNET-1149 | Mesh triangulate ne prend pas en charge VertexElementUserData avec le mode de mappage Polygone/PolygonVertex | Nouvelle caractéristique |
THREEDNET-1148 | Ajouter la prise en charge de VertexElementUserData dans TriMesh | Nouvelle caractéristique |
THREEDNET-1138 | Autoriser l’exportation VertexElementUserData vers glTF | Nouvelle caractéristique |
THREEDNET-1119 | Prise en charge des attributs du sommet personnalisés GLTF | Nouvelle caractéristique |
API changements
Mise à jour du type de propriété du Dictionary<String, Object>
au object
dans la classe Aspose.ThreeD.Entities.VertexElementUserData
:
/// <summary>
/// The user data attached in this element
/// </summary>
public object Data { get; set; }
Si l’ancien code attache plusieurs données dans VertexElementUserData
, il doit maintenant utiliser plusieurs VertexElementUserData
.
Avec ces changements API, nous pouvons prendre en charge le VertexElementUserData
en TriMesh
ou même exporté vers glTF:
Exemple de code:
//Manually define a cube
Vector4[]controlPoints = new Vector4[]{
new Vector4( -5.0, 0.0, 5.0, 1.0),
new Vector4( 5.0, 0.0, 5.0, 1.0),
new Vector4( 5.0, 10.0, 5.0, 1.0),
new Vector4( -5.0, 10.0, 5.0, 1.0),
new Vector4( -5.0, 0.0, -5.0, 1.0),
new Vector4( 5.0, 0.0, -5.0, 1.0),
new Vector4( 5.0, 10.0, -5.0, 1.0),
new Vector4( -5.0, 10.0, -5.0, 1.0)
};
// Initialize mesh object
Mesh mesh = new Mesh();
// Add control points to the mesh
mesh.ControlPoints.AddRange(controlPoints);
// Create polygons to mesh
// Front face (Z+)
mesh.CreatePolygon(new int[]{ 0, 1, 2, 3 });
// Right side (X+)
mesh.CreatePolygon(new int[]{ 1, 5, 6, 2 });
// Back face (Z-)
mesh.CreatePolygon(new int[]{ 5, 4, 7, 6 });
// Left side (X-)
mesh.CreatePolygon(new int[]{ 4, 0, 3, 7 });
// Bottom face (Y-)
mesh.CreatePolygon(new int[]{ 0, 4, 5, 1 });
// Top face (Y+)
mesh.CreatePolygon(new int[]{ 3, 2, 6, 7 });
//create a user data to store face id for each face, this is done by specifying MappingMode to Polygon
var userData = (VertexElementUserData)mesh.CreateElement(VertexElementType.UserData, MappingMode.Polygon, ReferenceMode.Direct); ;
//The name of the UserData will be used as the field's name
userData.Name = "__FACE_ID";
userData.Data = new double[]{
0,1,2,3,4,5
};
var triMesh = TriMesh.FromMesh(mesh);
Console.WriteLine("TriMesh:");
foreach(var vtx in triMesh)
{
Console.WriteLine(vtx);
}
La sortie est:
TriMesh:
Position = (-5,0,5), __FACE_ID = 0
Position = (5,0,5), __FACE_ID = 0
Position = (5,10,5), __FACE_ID = 0
Position = (5,10,5), __FACE_ID = 0
Position = (-5,10,5), __FACE_ID = 0
Position = (5,0,5), __FACE_ID = 1
Position = (5,0,-5), __FACE_ID = 1
Position = (5,10,-5), __FACE_ID = 1
Position = (5,10,-5), __FACE_ID = 1
Position = (5,10,5), __FACE_ID = 1
Position = (5,0,-5), __FACE_ID = 2
Position = (-5,0,-5), __FACE_ID = 2
Position = (-5,10,-5), __FACE_ID = 2
Position = (-5,10,-5), __FACE_ID = 2
Position = (5,10,-5), __FACE_ID = 2
Position = (-5,0,-5), __FACE_ID = 3
Position = (-5,0,5), __FACE_ID = 3
Position = (-5,10,5), __FACE_ID = 3
Position = (-5,10,5), __FACE_ID = 3
Position = (-5,10,-5), __FACE_ID = 3
Position = (-5,0,5), __FACE_ID = 4
Position = (-5,0,-5), __FACE_ID = 4
Position = (5,0,-5), __FACE_ID = 4
Position = (5,0,-5), __FACE_ID = 4
Position = (5,0,5), __FACE_ID = 4
Position = (-5,10,5), __FACE_ID = 5
Position = (5,10,5), __FACE_ID = 5
Position = (5,10,-5), __FACE_ID = 5
Position = (5,10,-5), __FACE_ID = 5
Position = (-5,10,-5), __FACE_ID = 5